Selected product filters Selected product filters

Adaptor Boards

A large range of adaptor boards.
£2.26 incl VAT £1.96 incl VAT (£1.63 exc. tax)
2900-601
This is the breakout board from Sparkfun BOB-09110 for the thumb joystick (not included but available - see related products below). Pins are broken out to a... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£3.61 incl VAT £3.13 incl VAT (£2.61 exc. tax)
2900-602
This is a simple microphone preamplifier circuit board from Sparkfun PRT-08872 for a wide range of microphone types, with good pre-amplification to attach to... read more
1 item(s)
End of line, less than 2 remaining
+
Add to wish list

£0.90 incl VAT £0.78 incl VAT (£0.65 exc. tax)
2900-603
Simple breakout board from Sparkfun BOB-08891 for the MQ-2, MQ-3, MQ-4, MQ-6 and MQ-7 gas sensors. All you need is VCC at 5V, GND, and a resistor to an ADC,... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£3.61 incl VAT £2.65 incl VAT (£2.21 exc. tax)
2900-604
Based on the Controllable Power Outlet Tutorial, this is the bare PCB from Sparkfun COM-09096 that allows you to switch high voltages with a simple 0 to 5V... read more
5 item(s)
End of line, less than 6 remaining
+
Add to wish list

£2.71 incl VAT £1.99 incl VAT (£1.66 exc. tax)
2900-605
The WiiChuck Adapter is a small PCB from Sparkfun DEV-09281 that is designed to be inserted into the connector of a Nintendo Wii Nunchuck to provide access... read more
1 item(s)
End of line, less than 2 remaining
+
Add to wish list

£1.12 incl VAT (£0.93 exc. tax)
2900-606
This breakout board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins - ground, +5V VCC, and an analog... read more
In stock
+
Add to wish list

£0.90 incl VAT £0.66 incl VAT (£0.55 exc. tax)
2900-608
Simple breakout board from Sparkfun PRT-08827 for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the... read more
6 item(s)
End of line, less than 7 remaining
+
Add to wish list

£1.81 incl VAT £1.56 incl VAT (£1.30 exc. tax)
2900-609
Description: This is a low-cost, basic SOIC breakout boards. This custom PCB will interface a standard SOIC package IC to 0.1" headers, which are... read more
6 item(s)
End of line, less than 7 remaining
+
Add to wish list

£1.81 incl VAT £1.56 incl VAT (£1.30 exc. tax)
2900-610
Description: 8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used... read more
10 item(s)
End of line, less than 11 remaining
+
Add to wish list

£0.90 incl VAT £0.66 incl VAT (£0.55 exc. tax)
2900-612
Description: This is a simple breakout board for RFID readers. This board will bring the 2mm spaced pins out to two 0.1" spaced headers. You can solder... read more
3 item(s)
End of line, less than 4 remaining
+
Add to wish list

£0.90 incl VAT £0.66 incl VAT (£0.55 exc. tax)
2900-615
 Description: This is a bread board friendly breakout board for the MiniDIN-6 connector, see related products below. Board brings out all 6 pins to a... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£1.81 incl VAT £1.32 incl VAT (£1.10 exc. tax)
2900-616
Description: 8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with 8 pin SSOPs.... read more
9 item(s)
End of line, less than 10 remaining
+
Add to wish list

£3.61 incl VAT £3.13 incl VAT (£2.61 exc. tax)
2900-628
The SparkFun 8-Pin SOIC to DIP Adapter is a small PCB that lets you adapt SOIC packages into a DIP footprint. These tiny boards are useful for modding and... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£0.90 incl VAT £0.66 incl VAT (£0.55 exc. tax)
2900-617
Description: Simple breakout board for the RCA phono connector, see related products below. Use this breakout (shipped bare) to allow breadboard or SIP... read more
10 item(s)
End of line, less than 11 remaining
+
Add to wish list

£1.81 incl VAT £1.56 incl VAT (£1.30 exc. tax)
2900-618
Description: 8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used... read more
5 item(s)
End of line, less than 6 remaining
+
Add to wish list

£1.26 incl VAT £0.92 incl VAT (£0.77 exc. tax)
2900-619
Description: This is a simple, but extremely handy board to adapt the common 10-pin ISP programmers to the smaller 6-pin ISP connections. We also designed... read more
6 item(s)
End of line, less than 7 remaining
+
Add to wish list

£1.81 incl VAT £1.56 incl VAT (£1.30 exc. tax)
2900-621
Description: Low-cost basic SOIC break out boards. These are custom PCB boards that interface standard SOIC devices to standard .1" headers. 28-SOIC:... read more
4 item(s)
End of line, less than 5 remaining
+
Add to wish list

£0.64 incl VAT £0.55 incl VAT (£0.46 exc. tax)
2900-622
Description: 6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Voltage... read more
3 item(s)
End of line, less than 4 remaining
+
Add to wish list

£1.81 incl VAT £1.56 incl VAT (£1.30 exc. tax)
2900-625
Description: Your basic SOIC break out boards. What's the difference? The 8 Pin board is TINY. And you can't beat the price! These are custom PCB boards... read more
7 item(s)
End of line, less than 8 remaining
+
Add to wish list

£1.81 incl VAT £1.32 incl VAT (£1.10 exc. tax)
2900-627
Description: Why not prototype in 3D? The SparkFun Penta-shape is a roughly 1" wide penta-shaped board with 0.1" spaced holes. Use it to create different... read more
10 item(s)
End of line, less than 11 remaining
+
Add to wish list